Charging Port Cover Replacement (Elite Pro/Rover/Golf)

Squeaking while riding is usually from the suspension components and is normal with normal use. Squeaking can be reduced or eliminated with lubrication. Suspension components are usually the cause of squeaking and other components can be lubricated as well following the same procedures.

Required Equipment

• Phillips Screwdriver

Procedures

‍

• Remove Charge Port Cover - Use a Phillips head screwdriver to remove the 2 screws on the charge port cover to remove.

The charge port is meant to protect the battery from dust and splashes of water but does not waterproof the battery compartment.

• Remove Charge Port Cover - Use a Phillips head screwdriver to install the 2 screws on the charge port cover to install the new cover. The actual charging port is contained within the battery that is inside the chassis compartment.

Have more questions? Contact support@cycleboard.com